What should you know about the smart vacuum install?

If you were thinking about smart vacuum install and “Can I install my smart vacuum?” you came to the right place. We will give you an understanding of the installation of smart vacuums through this article. 

How do I set up a smart vacuum cleaner?

Step 1 – Remove protection.

Remove the protective coverings from the vacuum and charging dock before use.

Step 2 – Configure the Charging Station

Ideally, the charging station should be mounted against a wall in a prominent area where the robot vacuum can quickly access it. Anything within 3 feet (1m) of the dock’s front and 3 feet (1m) on each side should be taken out of the area.

Step 3 – Connect the charging adapter.

To use the docking station, connect the charging adapter to an electrical outlet and the connection to the docking station’s socket. The LED indicator on the charging dock flashes when it is connected to a power source. For the smart vacuum to locate, the charging dock must always be plugged in.

Step 4 – Install side brushes.

Two side brushes are included with the vacuum and must be fitted on the vacuum’s bottom. The front of each side brush has an L or R to designate which side it belongs to on the robot. Side brushes have letters on them; robots have letters on them. Simple installation involves pushing the side brush into place on the square peg and then tightening the screw.

Step 5 – Charge the vacuum.

Charge the robot by aligning the charging pins on the robot’s bottom with those on the dock. There will be an audible tone to indicate that the robot and charging dock has been successfully connected. When the robot is charging, an indicator light on the docking station will flash. The indicator light will remain steady once charging is complete. The charging process takes about five hours.

How do you program a smart vacuum?

Based on the brand you purchased, the programming of the smart vacuum depends. When it comes to iRobot smart vacuums scheduling as follows;

1. Setting the time
2. Press and hold the “CLOCK” button.
3. Set the right time by pressing DAY, HOUR, and MINUTE while pressing CLOCK.
4. Release the “CLOCK” button. The vacuum will beep when the timer is set.

2. Setting a schedule

1. Press and hold the “SCHEDULE” button.
2. Set the schedule by pressing DAY, HOUR, and MINUTE while pressing SCHEDULE.
3. Release the “SCHEDULE” button. The vacuum will beep when the schedule is set.

3. To view a schedule

1. Press and hold the “SCHEDULE” button.
2. Press the DAY button while SCHEDULE is pressed to cycle through when the vacuum is scheduled to clean.
3. Release the “SCHEDULE” button.

4. To delete a schedule

1. Press and hold the “SCHEDULE” button.
2. Press the DAY button while SCHEDULE is pressed to cycle through when the vacuum is scheduled to clean.
3. Keep pressing and holding the “DAY” button while the vacuum displays the scheduled cleaning time you’d like to remove.
4. Release the “SCHEDULE” button.

5. To change a schedule

1. Press and hold the “SCHEDULE” button.
2. Next press the DAY button while SCHEDULE is pressed to cycle through when the vacuum is scheduled to clean.
3. Now, press the HOUR and MINUTE buttons on the vacuum when it displays the scheduled cleaning time you’d like to adjust.
4. Release the “SCHEDULE” button. When the schedule is adjusted, the vacuum will beep to let you know.

How do I connect my robot vacuum to Wi-Fi?

Step 1 – Download the app.

Download the required app through the Play Store or App Store.

Step 2 – Activate Wi-Fi signal

• A level floor surface is ideal for placing the charging station in an open, clean space.
• Connect one end of the wire cord to a wall socket and the other to the charging station.
• Under the robot, remove the yellow bin insert and battery pull tab.
• Assemble the vacuum on the charging dock, ensuring that the metal charging contacts on the charging dock correspond to the connections under the vacuum.
• Follow the Wi-Fi setup process. 

Step 3 – Begin the cleaning cycle.

One cleaning cycle with the smart vacuum cleans the entire floor of your house. When the smart vacuum’s battery runs low during a cleaning cycle, it returns to the charging station to catch up on some rest. When the robot vacuum’s battery is fully charged, it begins cleaning and then returns to the charging station to complete the job. Vacuums can’t be recharged if the charging station is out of reach. Cleaning is complete when it returns to its initial location.

How do I connect my Alexa vacuum cleaner? – Must-know Step in smart vacuum install

1. Connect the smart vacuum to your Wi-Fi connection.

To begin, download the app associated with the smart vacuum and set up a login and password. Following that, connect the charging dock to the wall and power up the robot vacuum.

1. Connect Amazon Echo to the smart vacuum.

• After connecting the robot cleaner to Wi-Fi, launch the Amazon Alexa app on your phone and touch the three-layered lines at the top.
• Select the “Skills and Games” feature.
• Tap the search icon and type the model of the smart vacuum.
• Select “Enable to use”.
• To complete the connectivity of the smart vacuum, you need to log into the robot vacuum account.

How to reset smart vacuum?

If you need to reset your smart vacuum, follow the below steps;

• Open the top cover of the smart vacuum.
• Press and hold the Reset button and Home button.
• Finally, release the Reset button and Home button once the cleaner starts to speak.